W12 4-Roll Plate Rolling Machine
Hydraulic CNC four-roll plate rolling machines for plate rolling and end pre-bending. Model-specific technical data is listed separately below.
Specifications by Model
Values below are transcribed from the matching FUMA technical sheets. Confirm the current revision and order configuration before quotation.
W12CNC-8×2000
| Maximum rolling thickness | 8 mm |
|---|---|
| Maximum pre-bending thickness | 6 mm |
| Maximum bending width | 2000 mm |
| Upper / lower / side roller diameter | Ø210 / Ø190 / Ø170 mm |
| Minimum roll diameter at full load | T8 × B2000 × Ø400 mm |
| Rated output torque | 4229 N·m |
| System working pressure | 16 MPa |
| Material yield limit | 245 MPa |
| Working speed | TBC — source sheets differ |
W12CNC-8×2500
| Maximum rolling thickness | 8 mm |
|---|---|
| Maximum pre-bending thickness | 6 mm |
| Maximum bending width | 2500 mm |
| Upper / lower / side roller diameter | Ø250 / Ø230 / Ø190 mm |
| Minimum roll diameter at full load | T8 × B2500 × Ø450 mm |
| Rated output torque | 8000 N·m |
| System working pressure | 16 MPa |
| Material yield limit | 245 MPa |
| Normal working speed | Approx. 4500 mm/min |
| Lower / side roller lift speed | Approx. 400 mm/min |
Servo motor configuration, optional equipment and order-specific specifications require confirmation against the approved technical agreement. No certification or performance claims are included here.
Rolling & Pre-Bending
The four-roll arrangement supports plate feeding, rolling and end pre-bending. Share the material grade, plate dimensions, target diameter and required output so the team can check the application against the selected model.
Information for Model Selection
Material
Material type and yield strength for the workpiece.
Part Dimensions
Plate thickness, width and target inside diameter.
Configuration
Required control, options and production process.
Discuss Your W12 Application
Send your project details for a model-specific review.
Get a Quote